Introduction to the three protection functions of the Wholesale pure sine wave inverter 3000W 12V products
Jul 11,2022
Short-circuit protection function: If the AC output circuit is short-circuited, the Wholesale pure sine wave inverter 3000W 12V device will automatically cut off the inverter output, the front LCD screen will display "overload", and at the same time, the buzzer will sound an alarm. At this time, close the inverter switch in front of the Wholesale pure sine wave inverter 3000W 12V products, and the "overload" display will disappear. If you need to restart, you must check to confirm that the output line is normal, and then turn on the switch to restore the inverter output.
Overheating protection function: If the temperature of the internal control part of the chassis of the Wholesale pure sine wave inverter 3000W 12V is too high, the device will automatically cut off the inverter output, and the front LCD screen will display "overheating". At the same time, the buzzer emits an alarm sound for about ten seconds. The inverter output will be restored only after the temperature of the Wholesale pure sine wave inverter 3000W 12V products return to the normal value.
Battery reverse connection protection function: The pure sine wave inverter equipment has perfect battery reverse connection protection function. If the positive and negative polarities of the battery are reversed, the fuse in the case will automatically blow to avoid damage to the battery and equipment. When installing the battery of the Wholesale pure sine wave inverter 3000W 12V products, be careful not to over-install.
More News
Subscribe
Check the latest news of our company anytime and anywhere.
Contact ZLPOWER

Floor 1- 3, Building 2, Runteng Shangpai Industry Zone 1, Number 3, Yonghe Road,Shiyan town, Baoan District, Shenzhen, China.
Copyright © 2021 ZLPOWER Electronics Co., Ltd. All rights reserved.